Showing all fixings for your Opel Corsa
This is a list of all nuts, bolts, fasteners or fixings we hold for the Opel Corsa. We hope the information you find here helps with your classic car build or restoration. Please consider sharing any details with us that you can add to this page.
|Rear bumper bracket to carrier (1983 - 1992)||Carriage Bolt||16 mm||8 mm||1.25 mm||Details|
|Rear bumper slider to side panel (1983 - 1992)||Hex Head Tap Bolt||17 mm||6 mm||1 mm||Details|
|Brake caliper to steering knuckle (1983 - 1992)||Hex Head Tap Bolt||40 mm||12 mm||1.75 mm||Details|
|Brake drum to rear wheel hub (1983 - 1992)||Flat Head Bolt||12 mm||6 mm||1 mm||Details|
|Brake pedal mounting brace to dash panel (1983 - 1992)||Hex Head Bolt||18 mm||8 mm||1.25 mm||Details|
|Handbrake cable equalizer to rear axle (1983 - 1992)||Carriage Bolt||30 mm||8 mm||1.25 mm||Details|
|Hollow bolt, vacuum oil feed pipe from alternator to cylinder block. (1983 - 1992)||Hex Head Tap Bolt||20 mm||8 mm||1.25 mm||Details|
|Alternator to alternator mounting bracket. Some also use a 135mm bolt. (1983 - 1992)||Hex Head Bolt||125 mm||8 mm||1.25 mm||Details|
|Alternator to limiter mounting bar (1983 - 1992)||Hex Head Bolt||30 mm||8 mm||1.25 mm||Details|
|Fuel filter bracket to fuel tank (1983 - 1992)||Hex Head Tap Bolt||20 mm||8 mm||1.25 mm||Details|
|Fuel pump to engine bolts (1983 - 1992)||Hex Head Tap Bolt||25 mm||8 mm||1.25 mm||Details|
|Ball Joint and pull brace to control arm (1983 - 1992)||Hex Head Bolt||36 mm||12 mm||1.75 mm||Details|
|Control arm to underbody bolt (1983 - 1992)||Hex Head Bolt||76 mm||10 mm||1.5 mm||Details|
|Rear axle bushing to underbody (1983 - 1992)||Hex Head Bolt||84 mm||10 mm||1.5 mm||Details|
|Rear shock absorber to rear axle or underbody (1983 - 1992)||Hex Head Bolt||63 mm||10 mm||1.5 mm||Details|
|Rear stabiliser bar to carrier (1983 - 1992)||Hex Head Bolt||35 mm||10 mm||1.5 mm||Details|
|Rear stub axle to axle carrier (1983 - 1992)||Hex Head Bolt||33 mm||10 mm||1.5 mm||Details|
This list is compiled from various internet sources and submissions from our community. If you have anything to add, please share details here.
Whether you are purchasing OEM or off the shelf replacements, please be aware that metal fixings are graded and for safety, you should talk with the supplier about your specific use.